Citizen C660 Specifikace stáhnout pdf (Strana 15)

15. USING ZONE SETTING

The zone setting function enables only those cities for which "SET" has been selected to

be easily accessed (displayed) in each mode.

1. 1.Turn the crown while in the normal position and

set the mode hand to the mode setting [SET] mode.

2. 2.The city can be changed by pulling out the crown

to the first click (for changing cities between SET

and OFF and for setting the location for switching

to daylight saving time).

3. Turn the crown to access the city to be set.

Turning the crown continuously causes the cities to

advance rapidly.

4. Press button (B) to set the city.

5. After setting, return the crown to the normal

position.

1. When button (A) or button (B) is pressed when the watch is in the zone setting [SET)

mode (with the crown in the normal position), the city name and SET or OFF are

displayed each time the button is pressed.

x Only those cities for which SET is displayed can be accessed from each mode.

16. About All Reset

When this watch indicates an abnormal display or does not function properly (no

display, alarm continues to sound, etc.) as a result of being subjected to the

effects of static electricity or strong impact and so forth, perform the all-

reset procedure described below.

When performing the all-reset procedure, first make sure that the watch is

sufficiently charged and that the charge indicator is lit.

<All-Reset Procedure>

4. 4. This fully lit display is canceled when the crown is returned to the normal

position.

a. After canceling, a confirmation tone is sounded after which each of

the hands perform a demonstration of the movement in the order of the

second, function, and minute hand to indicate that the all-reset

procedure is finished.

b. After the demonstration movement, pull the crown out to the first

click to switch the watch to the 0 position (base adjustment) setting

state.

c. Always make sure to set the 0-positoin (standard position) for the

hour, minute, second, 24-hour and function hands while referring to

section “5. Checking 0-Position of Each Hand <O-Position Corrections>”

NOTE: After setting the 0 position (base position) for each hand, correctly reset

the time, calendar and other modes before using this watch.

1. Turn the crown to set the mode hand to the

chronograph [CHR] mode.

2. Pull out the crown to the first click (0-

Position correction mode).

The second, minute, hour, 24- hour hand,

and Function hands rapidly advance to the

0 position stored in memory.

3. Press buttons (A),(B) and (C)

simultaneously and then release. All

segments of the digital display are shown

when either of the buttons is released.

Return to Table of Contents

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Komentáře k této Příručce

Žádné komentáře

Citizen C660 Specifikace Strana 15

Komentáře k této Příručce

Související produkty a manuály pro Sportovní hodinky Citizen C660