Citizen CLP-7002 Manuál s instrukcemi stáhnout pdf (Strana 29)

Before Operation

4 Self-Test Mode

In this mode, self-test printing is performed. With this test printing, you can check the current

printer configuration settings and print quality. After loading the paper and ribbon, operate the

printer as follows:

1. Press and hold the Feed key while turning the printer on.

When label paper is used: Hold down the Feed key for two (2) seconds and the printer will feed

the paper and print samples 1 and 2 and stop.

When continuous paper is used: Hold down the Feed key for four (4) seconds and the printer

will feed the paper and print samples 1 and 2 and stop.

ROM version No.

Date and time

ROM checksum

RAM check

Communication setting

Print mode

Media sensor voltage

Head rank and resistance value

Peeling sensor

Auto-cutter

Ribbon sensor

Total travel distance

Sample 1

TestPrin

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 80 81

Žádné komentáře

Citizen CLP-7002 Manuál s instrukcemi Strana 29