Citizen C70 Specifikace stáhnout pdf (Strana 183)

II Parameters

Spindle Parameters

II - 90

【#3059】 sptc6 Spindle synchronization multi-step acceleration/deceleration changeover

speed 6

Set the speed which switches from 6th step to 7th step in spindle synchronization multi-step

acceleration/deceleration control. Set the same value for the reference axis and

synchronous axis.

Set the value of limit rotation speed (slimit) or higher not to carry out a step shift.

---Setting range---

0 to 99999 (r/min)

【#3060】 sptc7 Spindle synchronization multi-step acceleration/deceleration changeover

speed 7

Set the speed which switches from 7th step to 8th step in spindle synchronization multi-step

acceleration/deceleration control. Set the same value for the reference axis and

synchronous axis.

Set the value of limit rotation speed (slimit) or higher not to carry out a step shift.

---Setting range---

0 to 99999 (r/min)

【#3061】 spdiv1 Time constant magnification for changeover speed 1

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 1 (sptc1) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3062】 spdiv2 Time constant magnification for changeover speed 2

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 2 (sptc2) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3063】 spdiv3 Time constant magnification for changeover speed 3

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 3 (sptc3) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3064】 spdiv4 Time constant magnification for changeover speed 4

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 4 (sptc4) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3065】 spdiv5 Time constant magnification for changeover speed 5

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 5 (sptc5) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3066】 spdiv6 Time constant magnification for changeover speed 6

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 6 (sptc6) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3067】 spdiv7 Time constant magnification for changeover speed 7

Set the acceleration/deceleration time constant to be used at the speed of changeover

speed 7 (sptc7) and higher in spindle synchronization multi-step acceleration/deceleration

control. Set this as a magnification in relation to the spindle synchronization acceleration/

deceleration time constant (spt).

---Setting range---

0 to 127

【#3068】 symtm1 Phase synchronization start confirmation time

Set the time to confirm that synchronization is attained before phase synchronization control

is started.

When "0" is set, the time will be 2 seconds. When "100" or less is set, the time will be

100ms.

---Setting range---

0 to 9999 (ms)

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 384 385

Komentáře k této Příručce

Darricknus 16 Feb 2024 | 10:14:18

Hello Guys, Glad to Join! :)

Citizen C70 Specifikace Strana 183

Komentáře k této Příručce

Související produkty a manuály pro ne Citizen C70