Citizen C70 Specifikace Strana 225
- Strana / 385
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
II Parameters
FL-net Parameters
II - 132
【#29026(PR)】 Cyclic Data:Area1 Other Node Area Module side Transfer Cont.
Cyclic data: Area1 Other node area Module side transfer word count
Set the word count of the data used for reading the other node data in cyclic data area 1 (bit
area).
The standard setting is "512".
(Note) An error will occur when the buffer offset value exceeds "512" after the transfer size
is added.
---Setting range---
1 to 512
【#29027(PR)】 Cyclic Data:Area1 Other Node Area Module side Buffer off.
Cyclic data: Area1 Other node area Module side buffer offset
Set the head offset of the buffer used for reading the other node data in cyclic data area 1
(bit area).
The standard setting is "0".
(Note) An error will occur when the buffer offset value exceeds "512" after the transfer size
is added.
---Setting range---
0 to 512
【#29028(PR)】 Cyclic Data:Area1 Other Node Area PLC side Device
Cyclic data: Area1 Other node area CPU side device
Set the internal device used for reading the other node data in cyclic data area 1 (bit area).
---Setting range---
Within the number of device points set in the PC parameter's device setting.
【#29029(PR)】 Cyclic Data:Area2 Local Node Area Module side Transfer Cont.
Cyclic data: Area2 Local node area Module side transfer word count
Set the word count of the data which is transferred by the local node to cyclic data area 2
(word area).
The standard setting is "8192".
(Note) An error will occur when the value buffer offset value exceeds "8192" after the
transfer size is added.
---Setting range---
1 to 8192
【#29030(PR)】 Cyclic Data:Area2 Local Node Area Module side Buffer off.
Cyclic data: Area2 Local node area Module side buffer offset
Set the head offset of the buffer for setting the data which is transferred by the local node to
the cyclic data area 2 (word area).
The standard setting is "0".
(Note) An error will occur when the value buffer offset value exceeds "8192" after the
transfer size is added.
---Setting range---
0 to 8192
【#29031(PR)】 Cyclic Data:Area2 Local Node Area PLC side Device
Cyclic data: Area2 Local node area CPU side device
Set the internal device to store the data transferred by the local node to cyclic data area 2
(word area).
---Setting range---
CPU-side device
【#29032(PR)】 Cyclic Data:Area2 Other Node Area Module side Transfer Cont.
Cyclic data: Area2 Other node area Module side transfer word count
Set the word count of the data used for reading the other node data in cyclic data area 2
(word area).
The standard setting is "8192".
(Note) An error will occur when the value buffer offset value exceeds "8192" after the
transfer size is added.
---Setting range---
1 to 8192
【#29033(PR)】 Cyclic Data:Area2 Other Node Area Module side Buffer off.
Cyclic data: Area2 Other node area Module side buffer offset
Set the head offset of the buffer used for reading the other node data in cyclic data area 2
(word area).
The standard setting is "0".
(Note) An error will occur when the value buffer offset value exceeds "8192" after the
transfer size is added.
---Setting range---
0 to 8192
- Trademarks 2
- Contents 4
- IMPORTANT 5
- I Alarms 8
- 1. Operation Errors (M) 10
- I Alarms 11
- 2. Stop Codes (T) 15
- 3. Servo/Spindle Alarms (S) 19
- 3.4 Parameter Errors (S51) 31
- 3.5 Servo Warnings (S52) 32
- 4. MCP Alarms (Y) 35
- 5.1 Safety Observation Alarms 41
- 6. System Alarms (Z) 47
- 11. Multi CPU Errors (A) 57
- 12. Network Errors (L) 74
- 13. Program Errors (P) 80
- II Parameters 92
- 1. Machining Parameters 94
- Machining Parameters 96
- II Parameters 100
- 4. Servo Parameters 151
- 5. Spindle Parameters 177
- Spindle Parameters 193
- 6. Multi-CPU Parameters 217
- 7. FL-net Parameters 218
- 8. DeviceNet Parameters 227
- 10. PLC Parameters 238
- 11. Macro List 239
- 12. Position Switches 247
- III PLC Devices 264
- 1.1 System State 266
- 1.2 Axis State 272
- 1.3 Part System State 276
- 1.4 Spindle State 284
- 2.1 System State 287
- 2.2 Part System State 290
- 2.3 Axis State 295
- 2.4 Spindle State 296
- 3.1 System Command 298
- 3.2 Axis Command 304
- 3.3 Part System Command 310
- 3.4 Spindle Command 324
- 4.1 System Command 327
- 4.2 Part System Command 330
- 4.3 Axis Command 335
- 4.4 Spindle Command 337
- 5. Each Application 339
- 5.2 PLC Axis Control 342
- 5.3 Window Result Information 345
- 5.4 Window Command 350
- 5.7 Safety Observing 364
- 5.8 PLC Constants 367
- 5.9 PLC Bit Selection 370
- 6.1 Special Relay 374
- 6.2 Special Register 378
- Duplication Prohibited 384
Komentáře k této Příručce
Související produkty a manuály pro ne Citizen C70
ne Citizen C520 Uživatelský manuál
(6 stránky)
(6 stránky)
ne Citizen CBM-202 Series Uživatelský manuál
(28 stránky)
(28 stránky)
ne Citizen PHU Series s Uživatelský manuál
(36 stránky)
(36 stránky)
ne Citizen CUN60 Manuál s instrukcemi
(14 stránky)
(14 stránky)
ne Citizen 8203 Manuál s instrukcemi
(15 stránky)
(15 stránky)
ne Citizen D716 Uživatelský manuál
(102 stránky)
(102 stránky)
ne Citizen BR0123-09E Uživatelský manuál
(23 stránky)
(23 stránky)
ne Citizen PMU Series s Uživatelský manuál
(6 stránky)
(6 stránky)
ne Citizen Palidoro BW0172-53E Uživatelský manuál
(31 stránky)
ne Citizen EW9990-54E Uživatelský manuál
(1 stránky)
(1 stránky)
ne Citizen BV1060-15E Uživatelský manuál
(48 stránky)
(48 stránky)
ne Citizen 6765 Uživatelský manuál
(7 stránky)
(7 stránky)
ne Citizen AU1054-54G Uživatelský manuál
(14 stránky)
(14 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.085 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Hello Guys, Glad to Join! :)