Citizen C70 Specifikace stáhnout pdf (Strana 38)

I Alarms

MCP Alarms (Y)

I - 29

Y05 Initial parameter error 2187 0

Details

There is a problem in the value set for the parameter.

Remedy

Correct the value set for parameter "#2187 chgPLCax (PLC axis switchover axis No.)".

Y05 Initial parameter error 12800 0

Details

There is a problem in the value set for the parameter.

Remedy

Correct the value set for parameter "#12800 chgauxno (Auxiliary axis number)".

Y05 Initial parameter error 22014 (sub-number)

Details

There is a problem, whose details are indicated by the sub-number, in the value set for the

parameter.

[sub-numbers]

0001: A value other than "0" is set for the parameter #22014 when multi-secondary-axis syn-

chronous control option is not available.

0002: More than 3 groups of axes are designated for synchronous control and multi-second-

ary-axis synchronous control combined.

0003: The axis designated as a secondary axis for multi-secondary-axis synchronous control

is also designated as an axis for synchronous control.

0004: The axis designated as the primary axis for multi-secondary-axis synchronous control

is also being designated as an axis for synchronous control.

0005: An axis that is used in more than one part systems is being designated as the primary

axis.

0006: An axis that is designated as a secondary axis is also being designated as the primary

axis.

Remedy

Correct the values set for "#1068 slavno (Secondary axis number)" and/or "#22014 Mastno

(Multi-secondary-axis sync primary axis number)".

Y06 mcp_no setting error

Details

- MCP Nos. of the servo/spindle drive units are not continuous.

- There is a duplicate setting.

- Axis No. is out of the setting range.

- Channel No. is out of the setting range.

Remedy

Check the values set for the following parameters.

- "#1021 mcp_no (Drive unit I/F channel No. (servo))"

- "#3031 smcp_no (Drive unit I/F channel No. (spindle))"

(Note 1) "#1021 mcp_no (Drive unit I/F channel No. (servo))" and "#3031 smcp_no (Drive unit

I/F channel No. (spindle))" must be continuous.

(Note 2) This alarm is displayed taking precedence over the alarms "Y02 System alarm", "Y07

Too many axes connected" and "Y09 Too many axisno connected".

(Note 3) Also for the spindle whose parameter "#3024 sout Spindle connection" is set to "0",

set the MCP No. to "#3031 smcp_no Drive unit I/F channel No. (spindle)". (C70 S/W

Ver.D3 or later)

Y07 Too many axes connected 000x

Details

The number of axes connected to each channel has exceeded the maximum number of con-

nectable axes.

The exceeded number of axes per channel is displayed as alarm No.

x: Exceeded number of axes at drive unit interface channel 1 (0 to F)

Remedy

- Correct the "#3024 sout (Spindle connection)" setting for the spindle to which the drive unit

is connected.

- Turn up the DIP switch for any unused axis in the multi-axes drive unit.

- Correct the "#1002 axisno (Number of axes)" and "#1039 spinno (Number of spindles)" set-

tings.

- For the channel(s) with an alarm number other than "0", disconnect the connected axes as

many as shown in the alarm No. so that the number of connected axes will not exceed the

maximum number of connectable axes.

(Note 1) This alarm occurs when the number of the connected axes exceeded the maximum

number of the connectable axes assumed in the system.

(Note 2) This alarm indicates a communication timeout state of drive unit (with "AA" in the drive

unit LED display) as the initial communication is not executed.

(Note 3) If this alarm occurs, the alarm "Y03 Message: Drive unit unequipped" will not occur.

(Note 4) This alarm is displayed taking precedence over the alarm "Y02 System alarm" and

"Y09 Too many axisno connected".

Y09 Too many axisno connected Exceeded number of axes 000x

Details

The No. of the axis (drive unit's rotary switch No.) connected to each channel is bigger than

the maximum number of connectable axes.

x: "1" when the axis number at drive unit interface channel 1 is too big

Remedy

For the channel whose alarm number is "1", change the axis number (drive unit's rotary switch

number) to a number within the limit of the maximum number of connectable axes.

Be sure to turn down the rightmost DIP switch on each drive unit.

(Note 1) This alarm occurs when the number of the connected axes exceeded the maximum

number of the connectable axes assumed in the system.

(Note 2) If this alarm occurs, drive unit indicates a communication timeout (with "AA" in the

LED display) as the initial communication is not executed.

(Note 3) If this alarm occurs, the alarm "Y03 Message: Drive unit unequipped" will not occur.

(Note 4) This alarm is displayed taking precedence over the alarm "Y02 System alarm".

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 384 385

Komentáře k této Příručce

Darricknus 16 Feb 2024 | 10:14:18

Hello Guys, Glad to Join! :)

Fujitsu VFY:A5300MXAA2DE Ficha de datos (6 paginas)

Marca: Fujitsu | Categoria: Notebooks | Tamaño: 0.22 MB |

Tabla de contenidos

DATASHEET

COMPONENTS

RECOMMENDED ACCESSORIES

Más productos y manuales para Cuadernos Fujitsu

Modelos	Tipo de documento
VFY:E7510MXP51NL	Ficha de datos Fujitsu LIFEBOOK E751, 7 paginas
LKN:T9010M0002IT	Ficha de datos Fujitsu LIFEBOOK T901, 8 paginas
VFY:P701XMF011NC	Ficha de datos Fujitsu LIFEBOOK P701, 6 paginas
PCK:GBH-T730-81GB	Ficha de datos Fujitsu LIFEBOOK T730, 7 paginas
VFY:S7610MF011NL	Ficha de datos Fujitsu LIFEBOOK S761, 6 paginas
VFY:A5300MF211ES	Ficha de datos Fujitsu LIFEBOOK A530, 6 paginas
VFY:H2700WX071DE	Ficha de datos Fujitsu CELSIUS H270, 5 paginas
VFY:A5300MF142IT	Ficha de datos Fujitsu LIFEBOOK A530, 6 paginas
LKN:E7810M0001IT	Ficha de datos Fujitsu LIFEBOOK E781, 7 paginas
VFY:E7820MXP21FR	Ficha de datos Fujitsu LIFEBOOK E782, 7 paginas
VFY:N5320M2501FR	Ficha de datos Fujitsu LIFEBOOK N532, 6 paginas
VFY:A5320M2321FR	Ficha de datos Fujitsu LIFEBOOK A532, 5 paginas
VFY:E7800MF161NL	Ficha de datos Fujitsu LIFEBOOK E780, 8 paginas
FPCR47651	Ficha de datos Fujitsu LIFEBOOK LH532, 6 paginas
LKN:H7100W0029FR	Ficha de datos Fujitsu CELSIUS H710, 7 paginas
VFY:NH532M3502BE	Ficha de datos Fujitsu LIFEBOOK NH532, 7 paginas
VFY:E7520M2501NC	Ficha de datos Fujitsu LIFEBOOK E752, 7 paginas
VFY:S7100MF041DE	Ficha de datos Fujitsu LIFEBOOK S710, 1 paginas
VFY:S7600MF121GB	Ficha de datos Fujitsu LIFEBOOK S760, 7 paginas
LKN:S7610M0008IT	Ficha de datos Fujitsu LIFEBOOK S761, 2 paginas

Citizen C70 Specifikace Strana 38

Komentáře k této Příručce

Fujitsu VFY:A5300MXAA2DE manuales

Fujitsu VFY:A5300MXAA2DE Ficha de datos (6 paginas)

Tabla de contenidos

Más productos y manuales para Cuadernos Fujitsu

Citizen C70 Specifikace Strana 38

Komentáře k této Příručce

Související produkty a manuály pro ne Citizen C70

Fujitsu VFY:A5300MXAA2DE manuales

Fujitsu VFY:A5300MXAA2DE Ficha de datos (6 paginas)

Tabla de contenidos

Más productos y manuales para Cuadernos Fujitsu