Citizen C70 Specifikace Strana 250
- Strana / 385
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
II Parameters
Position Switches
II - 157
【#7574】 <check> Selection of area check method PSW8
When position switch area checking at high speed is selected, specify the mode of area
checking, i.e., whether to use the command type machine position or detector feedback
position, for each position switch point.
0: Use the command type machine position as the machine position for position switch
area checking.
1: Use the detector feedback position as the machine position for position switch area
checking.
【#7581】 <axis> Axis name PSW9
Specify the name of the axis for which a position switch is provided.
---Setting range---
NC axis: axis name (X, Y, Z, U, V, W, A, B, or C)
PLC axis: PLC No. (1 to 8)
【#7582】 <dog1> Imaginary dog position 1 PSW9
When the machine enters the range between imaginary dog positions 1 and 2, a signal is
output to the PLC.
Part system 1 device: X668
Part system 2 device: X6E8
---Setting range---
-99999.999 to 99999.999 (0.001mm)
【#7583】 <dog2> Imaginary dog position 2 PSW9
When the machine enters the range between imaginary dog positions 1 and 2, a signal is
output to the PLC.
Part system 1 device: X668
Part system 2 device: X6E8
---Setting range---
-99999.999 to 99999.999 (0.001mm)
【#7584】 <check> Selection of area check method PSW9
When position switch area checking at high speed is selected, specify the mode of area
checking, i.e., whether to use the command type machine position or detector feedback
position, for each position switch point.
0: Use the command type machine position as the machine position for position switch
area checking.
1: Use the detector feedback position as the machine position for position switch area
checking.
【#7591】 <axis> Axis name PSW10
Specify the name of the axis for which a position switch is provided.
---Setting range---
NC axis: axis name (X, Y, Z, U, V, W, A, B, or C)
PLC axis: PLC No. (1 to 8)
【#7592】 <dog1> Imaginary dog position 1 PSW10
When the machine enters the range between imaginary dog positions 1 and 2, a signal is
output to the PLC.
Part system 1 device: X669
Part system 2 device: X6E9
---Setting range---
-99999.999 to 99999.999 (0.001mm)
【#7593】 <dog2> Imaginary dog position 2 PSW10
When the machine enters the range between imaginary dog positions 1 and 2, a signal is
output to the PLC.
Part system 1 device: X669
Part system 2 device: X6E9
---Setting range---
-99999.999 to 99999.999 (0.001mm)
【#7594】 <check> Selection of area check method PSW10
When position switch area checking at high speed is selected, specify the mode of area
checking, i.e., whether to use the command type machine position or detector feedback
position, for each position switch point.
0: Use the command type machine position as the machine position for position switch
area checking.
1: Use the detector feedback position as the machine position for position switch area
checking.
【#7601】 <axis> Axis name PSW11
Specify the name of the axis for which a position switch is provided.
---Setting range---
NC axis: axis name (X, Y, Z, U, V, W, A, B, or C)
PLC axis: PLC No. (1 to 8)
【#7602】 <dog1> Imaginary dog position 1 PSW11
When the machine enters the range between imaginary dog positions 1 and 2, a signal is
output to the PLC.
Part system 1 device: X66A
Part system 2 device: X6EA
---Setting range---
-99999.999 to 99999.999 (0.001mm)
- Trademarks 2
- Contents 4
- IMPORTANT 5
- I Alarms 8
- 1. Operation Errors (M) 10
- I Alarms 11
- 2. Stop Codes (T) 15
- 3. Servo/Spindle Alarms (S) 19
- 3.4 Parameter Errors (S51) 31
- 3.5 Servo Warnings (S52) 32
- 4. MCP Alarms (Y) 35
- 5.1 Safety Observation Alarms 41
- 6. System Alarms (Z) 47
- 11. Multi CPU Errors (A) 57
- 12. Network Errors (L) 74
- 13. Program Errors (P) 80
- II Parameters 92
- 1. Machining Parameters 94
- Machining Parameters 96
- II Parameters 100
- 4. Servo Parameters 151
- 5. Spindle Parameters 177
- Spindle Parameters 193
- 6. Multi-CPU Parameters 217
- 7. FL-net Parameters 218
- 8. DeviceNet Parameters 227
- 10. PLC Parameters 238
- 11. Macro List 239
- 12. Position Switches 247
- III PLC Devices 264
- 1.1 System State 266
- 1.2 Axis State 272
- 1.3 Part System State 276
- 1.4 Spindle State 284
- 2.1 System State 287
- 2.2 Part System State 290
- 2.3 Axis State 295
- 2.4 Spindle State 296
- 3.1 System Command 298
- 3.2 Axis Command 304
- 3.3 Part System Command 310
- 3.4 Spindle Command 324
- 4.1 System Command 327
- 4.2 Part System Command 330
- 4.3 Axis Command 335
- 4.4 Spindle Command 337
- 5. Each Application 339
- 5.2 PLC Axis Control 342
- 5.3 Window Result Information 345
- 5.4 Window Command 350
- 5.7 Safety Observing 364
- 5.8 PLC Constants 367
- 5.9 PLC Bit Selection 370
- 6.1 Special Relay 374
- 6.2 Special Register 378
- Duplication Prohibited 384
Komentáře k této Příručce
Související produkty a manuály pro ne Citizen C70
ne Citizen C520 Uživatelský manuál
(6 stránky)
(6 stránky)
ne Citizen CBM-202 Series Uživatelský manuál
(28 stránky)
(28 stránky)
ne Citizen PHU Series s Uživatelský manuál
(36 stránky)
(36 stránky)
ne Citizen CUN60 Manuál s instrukcemi
(14 stránky)
(14 stránky)
ne Citizen 8203 Manuál s instrukcemi
(15 stránky)
(15 stránky)
ne Citizen D716 Uživatelský manuál
(102 stránky)
(102 stránky)
ne Citizen BR0123-09E Uživatelský manuál
(23 stránky)
(23 stránky)
ne Citizen PMU Series s Uživatelský manuál
(6 stránky)
(6 stránky)
ne Citizen Palidoro BW0172-53E Uživatelský manuál
(31 stránky)
ne Citizen EW9990-54E Uživatelský manuál
(1 stránky)
(1 stránky)
ne Citizen BV1060-15E Uživatelský manuál
(48 stránky)
(48 stránky)
ne Citizen 6765 Uživatelský manuál
(7 stránky)
(7 stránky)
ne Citizen AU1054-54G Uživatelský manuál
(14 stránky)
(14 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.087 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Hello Guys, Glad to Join! :)